TM 55-1520-240-23-8
10-60.2
INSTALL FUEL LEVEL CONTROL VALVE AND MOUNTING BRACKET IN AUXILIARY
FUEL TANKS
(Continued)
10-60.2
Do not puncture or scratch lining
of fuel tank. If lining is broken, fuel
penetrates and activates self-sealing
layers. Activated layers swell and trap
fuel. Activated green spongy material
also contaminates fuel system. This
makes it necessary to replace fuel
tank and flush fuel system.
INSTALL MOUNTING BRACKET
NOTE
Three different types of mounting
bracket installation are used on the
helicopter. Each requires a different
attachment to the inside of the fuel
cell.
2.
For fuel cell 414PS401-8, position two brackets
(2). Install three bolts (3) and washers (4). Do
not tighten bolts at this time.
NO BREAK - WORK HARDER
For fuel cell 145P4056-1, position three thick
washers (5) and bracket (6). Install three bolts
(7) and thin washers (8).
NO BREAK - WORK HARDER
For fuel cell 145P4056-2, position three bushings
(9) and bracket (10). Install three bolts (11) and
washers (12).
10-310
