TM 55-1520-240-23-8
10-30
INSTALL AFT FUEL TANK CELL
(Continued)
10-30
9.
Coat two packings (13) with petrolatum (E274).
Install packings carefully in annular groove of
flange (14) at each end of cell (2). Make sure
packings are not disturbed during positioning of
fuel cell in pod (1).
10.
Align holes (15) with holes (16). Install two
screws (17) at each end of tank pod (1).
11.
Coat two packings (18) with petrolatum (E274).
Install packings carefully in annular groove of cell
flange (19). Position closure plate (20) at each
end of tank pod (1).
12.
Install four bolts (21) and washers (22). Torque
bolts to 60 to 80 inch-pounds.
13.
Coat packing (23) with petrolatum (E274). Install
packing carefully in annular groove of cell flange
(24). Make sure packing is not disturbed during
positioning of fuel cell (2) in pod (1).
14.
Align hole (25) in cell (2) with hole (26) in pod (1).
Install three screws (27).
15.
Position gasket (28) and filler adapter assembly
(29). Install six bolts (30) and washers (31).
Torque bolts to 60 to 80 inch-pounds.
16.
Position gasket (32) on flange (33) of fuel cell
(2). Align holes (34) in fuel cell with holes (35) in
pod (1). Install two screws (36).
10-143
