TM 55-1520-240-23-7
9-115
INSTALL CABIN/RAMP DOME LIGHT
9-115
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electrical Repairers Tool Kit, NSN 5180-00-323-4915
Soldering Gun
Materials:
Solder (E360)
Personnel Required:
Aircraft Electrician
Inspector
References:
TM 55-1520-240-23P
NOTE
Procedure is similar to install cabin
or ramp lights. Differences are noted
in text.
1.
Remove tape from two wires (1). Route wires
through hole in housing (2) and solder wires to
sockets (3 and 4). Use solder (E360). Remove
tags.
9-441