TM 55-1520-240-23-7
9-43
REMOVE APU GENERATOR CURRENT TRANSFORMER FORWARD
(Continued)
9-43
NOTE
Procedure is same for removal of
three APU current transformers.
Removal of one transformer is shown
here.
1.
Loosen six fasteners (1) and open power
distribution panel door (2).
2.
Remove two screws (3) and terminal cover (4).
Tag and disconnect wire (5) from terminal (6)
by removing nut (7) and washer (8). Tape ends.
Use tape (E385).
3.
Tag and disconnect two wires (9) from
transformer (10) by removing two screws (11),
two nuts (12), and four washers (13). Tape ends.
Use tape (E385).
4.
Remove four screws (14) and nuts (15). Feed
wire (5) through transformer (10) and remove
transformer from bracket (16).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-133