TM 55-1520-240-23-7
9-15
INSTALL DC BUS TIE RELAY
9-15
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electrical Repairers Tool Kit, NSN 5180-00-323-4915
Materials:
None
Personnel Required:
Aircraft Electrician
Inspector
References:
TM 55-1520-240-23P
1.
Position stud (1) of bus tie relay (2) in hole of
bus bar (3).
2.
Align two mount holes in relay (2) with holes
in power distribution panel (4) and install two
washers (5) and bolts (6).
3.
Install washer (7), lockwasher (8), and nut (9)
on stud (1).
4.
Remove tape from ends of two wires (10).
5.
Connect wires (10) to relay (2). Install washer
(11), lockwasher (12), and nut (13).
9-52