TM 55-1520-240-23-7
9-8
REMOVE POWER DISTRIBUTION PANEL (PDP)
(Continued)
9-8
2.
Tag and disconnect six wires (3) from relay (4)
by removing five nuts (5) and washers (6). Tape
wire ends. Use tags (E264) and tape (E385).
3.
Tag and disconnect electrical connector (7) from
relay (8).
4.
Tag and disconnect three wires (9) from relay (8)
by removing three nuts (10) and washers (11).
Tape wire ends.
5.
Tag and disconnect three wires (12) from relay
(13) by removing three nuts (14) and washers
(15).
6.
Tag and disconnect electrical connector (16)
from relay (13).
7.
Tag and disconnect wires (17) from board TB50
(18) by removing 6 nuts (19) and washers (20).
Tape wire ends. Lay harness aside.
8.
Cut and remove three straps (21) securing
bundle (22).
9-34