TM 55-1520-240-23-7
8-108
INSTALL CENTER INSTRUMENT PANEL
(Continued)
8-108
6.
Reach behind panel (1) and position three
switches (14) in panel (1). Install three nuts (15)
and washers (16).
7.
Position light plate (17) on panel (1). Install two
screws (18). Without 17 , install two lens caps
(19).
8.
Without 17 , reach behind panel (1) and solder
wires to each of two light sockets (20).
9.
With 17 , reach behind panel (1) and screw wires
onto light socket (21).
10.
Reach behind panel (1) and position two light
bases (22) in panel (1). Install two nuts (23) and
washers (24) on light bases.
11.
Install two lamps (25) in two lenses (26). Install
lenses in two light bases (22).
INSPECT
FOLLOW-ON MAINTENANCE:
Install clamp mounted instruments in center panel
(Task 8-87).
Install master caution panel (Task 9-131).
Install caution lights and VHF switch panel (Task
9-133).
Install fire pull control (Task 12-18).
Install fire agent switch (Task 12-20).
Perform operational check of affected systems (TM
55-1520-240-T).
END OF TASK
8-353
