TM 55-1520-240-23-7
8-80
INSTALL FUEL QUANTITY INDICATING SYSTEM THERMISTOR CONTROL UNIT
8-80
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electrical Repairers Tool Kit, NSN 5180-00-323-4915
Materials:
None
Personnel Required:
Aircraft Electrician
Inspector
References:
TM 55-1520-240-23P
1.
Position thermistor control unit (1) in console (2),
receptacle facing forward.
2.
Install two screws (3) and washers (4).
3.
Connect electrical connector (5).
INSPECT
4.
Position panel (6) on console (2). Tighten seven
fasteners (7).
FOLLOW-ON MAINTENANCE:
Test and adjust fuel quantity indicator (Task 8-80.5).
Perform operational check of fuel quantity indicating
system (TM 55-1520-240-T).
END OF TASK
8-214