TM 55-1520-240-23-6
7-227
ASSEMBLE BRAKE MASTER CYLINDER (AVIM)
(Continued)
7-227
7.
Install three packings (8) and two retainers (9) on
selector set (10).
8.
Install packing (11) and spring (12) in housing (3).
9.
Install selector set (12) in housing (3).
10.
Install packing (13) in sleeve (14).
11.
Install guide (15), spring (16), shim (17), piston
(18), and sleeve (14) in housing (3).
12.
If bearing (19) was removed from rod end
connector (20). Install bearing in end (TM
55-1520-322-24).
13.
Install pin (21) in groove of housing (3).
14.
Align groove in rod end connector (20) with pin
(21) in housing (3). Install connector on housing.
15.
Slide cap (22) over connector (20). Using strap
wrench install cap on housing (3).
7-853