TM 55-1520-240-23-6
7-193
INSTALL RAMP TRANSFER CYLINDER
(Continued)
7-193
4.
Position cylinder (4) on module (9). Have helper
hold cylinder.
5.
Install two bolts (10) and washers (11). Torque
bolts to 28 inch-pounds. Check for gap between
cylinder (4) and module (9).
6.
Lockwire bolts (10) to module (9). Use lockwire
(E231).
7.
Connect tube (12) to port (13). Tighten tube
clamp.
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operational check (TM 55-1520-240-T).
Service utility hydraulic reservoir (Task 1-59 or 1-62).
Close cargo ramp (TM 55-1520-240-10).
END OF TASK
7-771