TM 55-1520-240-23-6
7-144
REMOVE AND INSPECT APU MOTOR PUMP COUPLING AND SEAL (68WK02005-4)
(AVIM)
7-144
INITIAL SETUP
Applicable Configurations:
All
Tools:
Hydraulic Repairers Tool Kit, NSN 5180-00-323-4891
Technical Inspection Tool Kit, NSN 5180-00-323-5114
Materials:
None
Personnel Required:
Aircraft Pneudraulics Repairer
Inspector
Equipment Condition:
Off Helicopter Task
NOTE
General inspection criteria (Task
7-1.1) for obvious damage applies
unless otherwise stated.
Inspection steps cover parts that are
subject to wear.
1.
Remove retainer (1) from plate (2) of motor
pump (3). Use thin bladed screwdriver (4) under
flanges (5). Push in and pry out.
7-643