TM 55-1520-240-23-6
7-128
INSPECT SERVOCYLINDER BEARING FOR RADIAL AND AXIAL PLAY
(Continued)
7-128
INSPECT PIVOTING AND SWIVELING
SERVOCYLINDER LUG BEARING FOR AXIAL AND
RADIAL PLAY
NOTE
Procedure is same to inspect pivoting
or swiveling servocylinder lug bearing
for axial and radial play. Swiveling
servocylinder is shown here.
1.
Install bolt (1), two spacers (2), plate (3), and
nut (4) in bearing (5).
2.
Clamp head of bolt (1) in vise (6).
3.
Mount indicator (7) on plate (3). Position point (8)
against lug (9), parallel to plate (3).
4.
Push servocylinder (10) toward bolt (1), then pull
away. Keep servocylinder 90º to bolt.
5.
Read bearing (5) radial play on indicator (7).
Reading shall not exceed 0.001 inch for new or
overhauled servocylinder (10). Reading shall not
exceed 0.003 inch for inservice servocylinder.
INSPECT
6.
Remove indicator (7) from plate (3).
7-571