TM 55-1520-240-23-6
7-83.1
INSPECT INTEGRATED LOWER CONTROL ACTUATOR (ILCA) (Continued)
7-83.1
NOTE
Reading for all axial bearing checks
shall not be more than 0.040 inch.
5.
Check for axial looseness between levers (4) and
bearing (5) as follows:
a.
Push and hold bolt (7).
b.
Preload dial indicator (6) against lever and
zero the indicator.
c.
Move lever (4) towards indicator. Take
reading.
6.
Repeat step 5 for lever (4), bearing (8), and bolt
(9).
7.
Check for axial looseness between bearing
housing (10) and bearing (11) as follows:
a.
Push and hold bolt (12).
b.
Preload dial indicator (6) against housing and
zero the indicator.
c.
Move housing (10) towards indicator. Take
reading.
NOTE
Reading for all radial bearing checks
shall not be more than 0.004 inch.
8.
Repeat step 5 to check for radial looseness of
lever (4), bearing (5), and bolt (9).
9.
Repeat step 5 to check for radial looseness of
lever (4), bearing (8), and bolt (7).
10.
Repeat step 5 to check for radial looseness of
link (14), bearing (13), and bolt (15).
7-334
