TM 55-1520-240-23-6
7-343
BLEED WINCH HYDRAULIC SYSTEM (WITHOUT EXTERNAL POWER)
(Continued)
7-343
NOTE
Throughout this task, whenever a
connection is loosened to let air
escape from a hydraulic line, use a
container and cloths (E120) to catch
spilled fluid. Wear gloves (E186).
1.
Disconnect drain hose (1) from winch motor (2).
2.
Loosen nut (3) of elbow (4). Remove elbow,
packing (5), and washer (6).
3.
Fill motor (2) through port (7) with fluid (E199).
Tap motor with soft-faced hammer to remove
trapped air.
4.
Install washer (6) and packing (5) on elbow (4).
5.
Install elbow (4). Tighten nut (3).
7-1269