TM 55-1520-240-23-6
7-301
REMOVE AND INSPECT POWER STEERING ASSEMBLY PRESSURE TUBE (AVIM)
7-301
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Technical Inspection Tool Kit, NSN 5180-00-323-5114
Materials:
None
Personnel Required:
Medium Helicopter Repairer
Inspector
Equipment Condition:
Off Helicopter Task
Power Steering Assembly Removed (Task 7-299)
1.
Remove lockwire, plug and bleeder (1), and
packing (2) from housing (3).
2.
Remove tube (4).
3.
Remove packing (5) and retainer (6) from
housing (2).
4.
Remove retainer (7) and packing (8) from
housing (9).
5.
Check tube (4) for dents and scratches. Dents
shall not be deeper than 0.050 inch. Scratches
shall not be deeper than 0.005 inch.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-1101