TM 55-1520-240-23-6
7-293
REMOVE POWER STEERING AND SWIVEL LOCK CONTROL VALVES
(Continued)
7-293
NOTE
Procedure to remove power steering
or swivel lock control valves is same.
Power steering control valve is shown
here.
1.
Disconnect connector (1) from valve (2).
2.
Remove lockwire from valve (2).
3.
Remove valve (2), three packings (3), and six
retainers (4) from PWR STRG V port (5). Use
container and cloths (E135) for spilled fluid. Use
gloves (E186).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-1086