TM 55-1520-240-23-5
6-199
REPLACE ENGINE TRANSMISSION MAIN OIL FILTER ELEMENT
(Continued)
6-199
INSTALL FILTER ELEMENT
Dry cleaning solvent (E162) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention.
5.
Clean inside of housing (7) with dry cleaning
solvent (E162) and cloths (E120). Wear gloves
(E186).
6.
Hold housing (7) with indicating button (10) up.
Push in button to lock it down.
NOTE
Do not install a used filter.
7.
Install new element (8) in housing (7). Install
gasket seal (9) and housing on four studs (11).
8.
Install four washers (6) and nuts (5). Torque nuts
to 60 inch-pounds.
INSPECT
FOLLOW-ON MAINTENANCE:
Service engine transmission (Task 1-54).
Close cargo ramp (Task 2-2).
END OF TASK
6-656