TM 55-1520-240-23-5
6-130
REMOVE FORWARD TRANSMISSION INLET SCREEN
6-130
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Socket, 1 Inch
Container, 2 Quart
Materials:
Barrier Material (E80)
Tape (E388)
Cloths (E120)
Personnel Required:
Medium Helicopter Repairer
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Left Forward Transmission Fairing Open (Task 2-2)
1.
Remove lockwire from inlet screen (1).
Do not let debris enter transmission.
Damage can result.
2.
Remove screen (1) and packing (2) from
transmission cavity (3). Catch spilled oil in
container. Use cloths (E120) for spilled fluid.
3.
Check outside of screen (1) for debris. If there
is debris, perform a serviceability check of the
forward transmission (Task 6-112).
4.
Make sure no debris remains within cavity (3).
Cover cavity with barrier material (E80) and tape
(E388).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
6-489
