TM 55-1520-240-23-5
6-123
REPLACE FORWARD TRANSMISSION MAIN OIL FILTER ELEMENT
(Continued)
6-123
NOTE
Packings are supplied with element.
Do not reuse removed element.
NOTE
Lubricate threads of self-locking
nuts prior to torquing and lubricate
packings prior to installation. Use oil
(E253, E254, or E254.1).
8.
Install element (9), with packings (12), in pump
(13).
9.
Install gasket seal (8) and housing (3) on four
studs (14). Install four washers (7) and nuts (6).
Torque nuts to 70 to 85 inch-pounds (wet).
10.
If housing (3) is not a replacement, remove drain
plug (4) and packing (5). Install plug and new
packing. Lockwire plug to housing (3). Use
lockwire (E230).
INSPECT
FOLLOW-ON MAINTENANCE:
Service forward transmission (Task 1-54).
Install forward transmission drip pan (Task 2-3).
END OF TASK
6-474