TM 55-1520-240-23-5
6-114
INSTALL FORWARD TRANSMISSION OIL COOLER
(Continued)
6-114
Transfer tubes can be damaged if
cooler is not aligned.
4.
Align cooler (5) with eight studs (6) and two
transfer tubes (1). Install cooler on studs and
tubes. Use rawhide mallet.
5.
Install eight washers (7) and nuts (8) on studs
(6). Torque nuts to 60 inch-pounds.
6.
Lockwire drain plug (9) to nipple (10), if required.
Use lockwire (E230).
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
6-444
