TM 55-1520-240-23-5
6-100
REMOVE ENGINE TRANSMISSION
(Continued)
6-100
5.
Connect sling (T3) (12) to lifting lug (13).
Connect hoist hook (14) to sling (T3).
6.
Have helper raise hoist hook (14) to take up slack
in sling (T3) (12). Do not apply tension to sling.
7.
Attach guide line (15) around transmission (7).
8.
Remove eight nuts (16) and washers (17) from
studs (18). Discard nuts.
Transmission is heavy and can injure
personnel if it drops. Transmission
must be supported by hoist and
moved carefully to prevent injury to
personnel.
9.
Remove transmission (7) from studs (18) and
quill shaft (19). Lower transmission to padded
support. Remove sling (T3) (12).
10.
Remove quill shaft (19). Remove packing (20)
from engine (21).
11.
Wipe up spilled oil. Use cloths (E120).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
6-404