TM 55-1520-240-23-5
6-82
REMOVE AFT TRANSMISSION INPUT SHAFT SEAL
6-82
INITIAL SETUP
Applicable Configurations:
All
Tools:
Powertrain Repairers Tool Kit, NSN
5180-00-003-5267
Workstand
1/4-28 Bolt, At Least One Inch Long (3)
Materials:
None
Personnel Required:
Aircraft Powertrain Repairer
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Cargo Ramp Open and Level (Task 2-2)
Baffles Under Aft Transmission Open (Task 2-2)
Aft Transmission Drip Tray Removed (Task 2-3)
No. 9 Drive Shaft Removed (Task 6-21)
1.
Remove adapter assembly (1) and packing (2)
from input shaft (3). Do not disturb position of
input shaft.
2.
Remove four nuts (4) and washers (5) from
retainer (6).
3.
Install three 1/4-28 bolts (7) in threaded holes (8).
Turn bolts to jack retainer (6) off transmission (9).
4.
Remove packing (10) from retainer (6).
6-317