TM 55-1520-240-23-5
6-62
INSTALL AFT ROTOR SHAFT THROUGH TOP OF PYLON
(Continued)
6-62
16.
Connect drain hose (36) to union (37). Connect
connector (38) to chip detector (39).
17.
Install access panel (40). Tighten four turnlock
fasteners (41). Install access panel (42) Tighten
four turnlock fasteners (43).
18.
Connect pressure hose (44) to filter (45).
Connect connector (46) to oil pressure switch
(47).
19.
Remove hook (3) and hoisting eye (1) from top of
shaft (2).
INSPECT
FOLLOW-ON MAINTENANCE:
Install swashplate (Task 5-133).
Install drive arms (Task 5-112).
Install drive collar (Task 5-111).
Install weather-protective cover (Task 5-138).
Install rotary-wing head (Task 5-9).
Check vertical pin angle (Task 11-58).
Install rotary-wing blades (Task 5-84).
Phase rotary-wing system (Task 6-28).
Perform operational check of aft rotor shaft chip
detector (TM 55-1520-240-T).
Close pylon work platforms (Task 2-2).
Service aft transmission with oil (Task 1-54).
Perform a ground run (TM 55-1520-240-10).
END OF TASK
6-242
