TM 55-1520-240-23-4
5-104
ASSEMBLE DRIVE COLLAR (AVIM)
5-104
INITIAL SETUP
Applicable Configurations:
All
Tools:
Technical Inspection Tool Kit, NSN 5180-00-323-5114
Arbor Press
Adapter (APP E-9)
Materials:
Epoxy Primer (E293)
Gloves (E186)
Personnel Required:
Aircraft Powertrain Repairer (2)
Inspector
References:
TM 55-1500-322-24
TM 55-1520-240-23P
Appendix E
Epoxy primer (E293) is flammable and
toxic. It can irritate skin and cause
burns. Use only in well-ventilated
area, away from heat and open flame.
In case of contact, immediately flush
skin or eyes with water for at least
15 minutes. Get medical attention
for eyes.
Do not lubricate bearings. Do not
apply primer to inside diameter of
bearings. Coating of bearing can be
damaged.
NOTE
Procedure is same to assemble
forward or aft drive collar.
1.
Apply epoxy primer (E293) to outside diameter
of bearings (1) and bore of lugs (2). Use gloves
(E186).
2.
Press bearings (1) into lugs (2). Use arbor press
and adapter (TM 55-1500-322-24).
5-620
