TM 55-1520-240-23-4
5-2
PREPARE ROTARY-WING HEADS FOR SHIPMENT OR STORAGE
(Continued)
5-2
Head can be easily damaged. Move
head slowly and carefully to prevent
it from hitting container.
20.
Position head (1) in container (T73) (26). Use
lifting device (T30) (16) and hoist (19). Have
helper guide head.
21.
Remove three pins (17). Turn three SUPPORT
arms (18) outward. Remove lifting device (16).
22.
Install cushion (30), plate (29), washer (28), and
nut (27).
23.
Install three cushions (34) and clamp angles
(33). Secure with six washers (32) and nuts (31).
Tighten nuts just enough to compress cushions.
24.
Wrap each of three pins (9) with foam (E181)
(37).
NOTE
Pack only one pin in each box.
25.
Pack three pins (9) in three boxes (E82) (38).
Seal boxes with tape. Tape two nuts (10) on top
of each box. Use tape (E395).
26.
Position three boxes (38) in container (T73) (26).
Secure boxes with straps (39).
5-12
