TM 55-1520-240-23-4
5-28
REMOVE VERTICAL HINGE PIN OIL TANKS
(Continued)
5-28
3.
If tank (2 or 5) will be replaced, do the following:
a.
Remove lockwire from remaining plug (1 or
4), and two sight indicators (7 or 8).
b.
Remove remaining plug (1 or 4), and packing
(3 or 6).
c.
Remove two sight indicators (7 or 8) and two
packings (9).
4.
If tank will be reinstalled, install plugs (1 and 4)
and two packings (3 and 6) in tank (2 or 5).
5.
Remove lockwire between tank (2 or 5) and
mainfold tube (10).
NOTE
Use care when removing lower oil
tank. Bearing inner race may fall from
bearing. Support race during tank
removal.
6.
Turn tank (2 or 5) counterclockwise. Use wood
block as lever between filler lugs of tank. Remove
tank and packing (11).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
5-142