TM 55-1520-240-23-3
4-141
REPLACE ENGINE WATER WASH NOZZLES AND MANIFOLDS
(Continued)
4-141
11.
Apply sealant (E336) to manifold fittings (2) and
fairing surface (7).
12.
Fill gaps between manifold fittings (2) and fairing
slots (9) with sealant (E336). Wear gloves
(E184.1).
13.
Apply a minimum bead of 0.025 inch of sealant
(E336) around the manifold nozzle base (11) and
fairing surface (7).
14.
Ensure that sealant (E336) is flush with inlet side
of fairing (12).
INSPECT
15.
Install two caps (5) on manifold assemblies (6).
Lockwire (E229).
16.
Allow sealant (E336) to cure for 24 hours after
application.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
4-467