TM 55-1520-240-23-3
4-93
INSTALL OIL PUMP ON NO. 1 POWERPLANT
(Continued)
4-93
8.
Position bracket (14) over two inboard studs (8).
9.
Install two washers (15) and nuts (16) on two
inboard studs (8). Tighten all four nuts (13 and
16).
10.
Connect drain hose (17). Remove tag.
11.
Connect drain hose (18). Remove tag.
12.
Connect drain hose (19). Remove tag.
13.
Connect drain hose (20). Remove tag.
14.
Connect clamp (21) to bracket 14. Install screw
(22), two washers (23), and nut (24).
15.
Remove cap from fitting (25) and connect fuel
hose (26).
16.
Connect cable connector (27) to tachometer
generator (10). Lockwire connector with lockwire
(E231).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
4-354