TM 55-1520-240-23-3
4-63
ADJUST NEW ENGINE AIR INLET SCREENS
(Continued)
4-63
ADJUST LATCHES
13.
Adjust all latches as in steps 6, 7, 11, and 12 in
the following sequence:
a.
Upper screen center latch (17).
b.
Lower inboard latch (18).
c.
Upper outboard latch (19).
d.
Lower outboard latch (20).
e.
Upper inboard latch (21).
14.
Perform step 13 until a moderate force is required
to close latches (1 or 5).
15.
Repeat step 13 until a firm force is required to
close latches (1 or 5).
16.
Tighten nuts (2 and 4 or 6) on tee bolts (3 or 7).
17.
If too few tee bolt threads (22) are available to
accomplish a firm force on latches, add another
nose cushion (Task 4-159). If firm closing force is
obtained, go to step 19. If not, perform step 18.
18.
Repeat steps 14, 15, and 16.
4-279
