TM 55-1520-240-23-3
3-11
INSTALL LANDING GEAR TIRE AND TUBE (Continued)
3-11
WARNING
Dry cleaning solvent (E162) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
NOTE
Procedure is same for installing all
landing gear tires and tubes.
1.
Clean wheel halves (1) and (2) with solvent
(E162) and cloths (E120). Wear gloves (E184.1).
Wipe rims dry.
2.
Clean dust and foreign materials from inside of
tire (3). Use cloths (E120).
3.
Install valve core (4) in valve (5).
4.
Inflate tube (6) part way. Insert tube in tire (3).
4.1.
Install packing (6.1) in groove of outer wheel
half (2).
Change 1
3-35