TM 55-1520-240-23-3
4-58
ASSEMBLE ENGINE ACCESS COVER
4-58
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Materials:
None
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
NOTE
Make sure each access door hinge
has bushing installed.
1.
Position side access door (1) on engine access
cover (2). Install two bolts (3), four washers (4),
and two nuts (5).
2.
Position side access door (6) on engine access
cover (2). Install two bolts (7), four washers (8),
and two nuts (9).
3.
Position hinge link (10) on cover (2). Install bolt
(11), two washers (12), washer (13), and nut (14).
4.
Position hinge link (15) on cover (2). Install bolt
(16), two washers (17), washer (18), and nut (19).
5.
Position turnbuckle (20) on cover (2). Install bolt
(21), washer (22), spacer (23), washer (24), and
nut (25).
6.
Position turnbuckle (26) on cover (2). Install bolt
(27), washer (28), spacer (29), washer (30), and
nut (31).
INSPECT
4-264
