TM 55-1520-240-23-3
4-51
ADJUST ENGINE ACCESS COVER
(Continued)
4-51
2.
Make sure cover (1) sits firmly on engine cover
former (3).
3.
Check gap between aft end of cover (1) and
exhaust cone (4). An uneven gap is allowed.
Minimum gap shall be 0.50 inch.
4.
Make sure gap between cover (1) and fairing (5)
is equal to gap between cover and lower access
door (6). If gaps are not equal, perform step 5. If
gaps are equal, go to Follow-On Maintenance.
4-254
