TM 55-1520-240-23-3
4-39
INSTALL AFT ENGINE MOUNT LINK AND ADAPTER (Continued)
4-39
INSTALL AFT ENGINE MOUNT LINK AND ADAPTER
(WITHOUT 57 )
5.
Install link (4) as follows:
a.
Remove tags from link (4), bolts (6 and 11)
and spacer (5).
b.
Align holes in link (4) and spacer (5) with
holes in adapter (1). Ensure spacer is on
same side as fixed bushing.
c.
Install bolt (6), bushing (7), two washers (13),
and nut (14).
d.
Align holes in link (4) with holes in aft engine
mount (10).
e.
Install bolt (11), bushing (12), two washers
(13), and nut (14).
6.
Torque nut (9) to 350-400 inch-pounds to seat
bushing (7). Loosen nut and retorqe nut to 20
inch-pounds above run-on torque value, but
in no case should the torque be less than 70
inch-pounds.
7.
Torque nut (14) to 350-400 inch-pounds to seat
bushing (12). Loosen nut and retorque nut to
20 inch-pounds above run-on torque value, but
in no case should the torque be less than 70
inch-pounds.
8.
Go to step 12.
INSPECT
4-207
