TM 55-1520-240-23-3
4-11.1
DISASSEMBLE POWERPLANT
(Continued)
4-11.1
17.
Remove two screws (55) and nuts (56) and
remove four clamps (57). Use tape (E388) to
mark clamp locations.
18.
Tag and remove three hoses (58). Use tags
(E264). Use a container and cloths (E135) to
catch spilled liquid.
19.
Remove four screws (59) and nuts (60) and eight
clamps (61). Use tape (E388) to mark clamp
locations.
20.
Tag and remove hose (62). Use tags (E264).
NOTE
Engine mount adapters and aft mount
link must not be removed if powerplant
is to be stored on adapter.
4-75