TM 55-1520-240-23-3
3-42
INSTALL AFT LANDING GEAR SHOCK STRUT
(Continued)
3-42
12.
Install washer (16) and bolt (17).
INSTALL AND TORQUE NUTS
13.
Install washer (18) and upper nut (19).
14.
Torque upper nut (19) to 25 to 35 foot-pounds.
15.
Install cotter pin (20).
NOTE
Clearance must exist between shock
strut and attachment fitting. Damage
other than minor requires replacement
of fitting.
16.
Torque lower nut (13) to 25 to 35 inch-pounds.
17.
Install cotter pin (21).
INSPECT
FOLLOW-ON MAINTENANCE:
Service shock strut (Task 1-72).
Lower and remove jack (Task 1-24).
Close access panels (Task 2-2).
Close engine work platform (Task 2-2).
END OF TASK
3-113