TM 55-1520-240-23-3
3-34
REMOVE AFT LANDING GEAR AXLE
(Continued)
3-34
REMOVE AXLE
NOTE
Procedure is same for left or right axle.
Left side is shown here. Static ground
wire is installed on left side only.
1.
Remove cotter pin (1), nut (2), washer (3), bolt
(4), two packings (5), and bracket (6).
2.
Remove retaining ring (7) and sleeve (8).
3.
Remove axle extension (9).
4.
Remove axle (10).
FOLLOW-ON MAINTENANCE:
Inspect axle (Task 3-13).
END OF TASK
3-87