TM 55-1520-240-23-11
17-9
REMOVE EMERGENCY EXIT LIGHT PANEL AND PAN
(Continued)
17-9
NOTE
Procedure is same to remove any exit
light panel and pan. Panel and pan
above escape hatch are shown here.
1.
Remove blankets (1), if needed (Task 2-208).
2.
Remove three screws (2) and washers (3).
3.
Tag (E264) and disconnect three wires (4) from
back of panel (5) by removing screws (6) and
washers (7). Loosen clamp (8), if needed.
4.
Remove panel (5) and pan (9).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
17-24
