TM 55-1520-240-23-11
E-91
ENGINE ACCESS COVER HINGE 114P8030-89,-91,-63
E-91
NOTES:
1.
MAKE -89 HALF HINGE FROM MS20257H
P4-7200.
2.
MAKE -91 HINGE PIN FROM MS20253-2-7200.
3.
MAKE -63 HALF HINGE FROM MS20257H
P4-7200.
4.
USE OLD HINGE HALVES FOR TEMPLATES
AND FOR MAKING HOLES IN NEW HINGES.
5.
REMOVE CENTER LOBE. INSTALL SPRING
114P8039-2.
6.
CRIMP ENDS OF PIN (E-60).
7.
MAKE NEW HINGE SAME LENGTH AS
ORIGINAL.
8.
FINISH WITH YELLOW ZINC CHROMATE
PRIMER (E-290).
END OF TASK
E-168
