TM 55-1520-240-23-10
16-86
SKI INSTALLATION
(Continued)
16-86
15.
Position spring cylinder (8) on swivel fitting (64).
Install bolt (65), two washers (66), and nut (67)
on swivel fitting.
16.
Install two end fittings (68) on landing gear (55)
at upper scissor point (58).
17.
Spring tension on cylinder (8) may be too strong
to install cylinder and fitting (68) on landing gear
(55). If so, remove lower end of cylinder (8), bolt
(7), bushing (9), and nut (10) from eyebolt (6).
18.
Position swivel fitting (64) on forward landing
gear (55) at upper scissor point (58). Install bolt
(69), two washers (70), and nut (71).
19.
Remove cotter pin (72), nut (73), washer (74),
towing shackle (75), and bolt (76) from forward
landing gear (55).
20.
Slip ring (77) of safety cable (3), and ring (78) of
check cable (25) on shackle (75).
21.
Install shackle (75), bolt (76), washer (74), and
nut (73) on landing gear (55). Install cotter pin
(72) in nut (73).
16-322