TM 55-1520-240-23-10
16-40.1
INSTALL CARGO HOOK MANUAL RELEASE BELLCRANK
16-40.1
INITIAL SETUP
Applicable Configurations:
With 35
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Materials:
Lockwire (E231)
Parts:
Cotter Pins
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
1.
Position manual release bellcrank (1) on mount
(2).
2.
Align hole in aft release cable (3) and bellcrank
(1). Install pin (4), washer (5), and cotter pin (6).
3.
Align hole in forward release cable (7) and
bellcrank (1). Install pin (8), washer (9), and
cotter pin (10).
4.
Route cable (11) past bellcrank (1). Install bolt
(12) and washer (13) securing retainer (14).
Lockwire bolt with lockwire (E231).
5.
Check that cable (11) protrudes past bracket
(15) 0.70 to 0.75 inch. This dimension is for
initial installation and may change during final
adjustment.
6.
Hold jam nut (16). Tighten jam nut (17). Lockwire
jam nuts together with lockwire (E231).
16-207