TM 55-1520-240-23-10
12-12
REMOVE FIRE DETECTION SENSING ELEMENT
(Continued)
12-12
3.
Disconnect element (7) from connector (8). Make
sure insert (6) stays in connector.
4.
Remove lockwire and nut (9) from connection
(8). Remove cable (2) and bushing (3). Remove
bushing from cable. Cap cable ends.
5.
Disconnect element (7) from connector (10).
Make sure insert (6) stays in connector.
6.
Turn fastener (1) and release element (7) and
bushings (3) from clamp (4) and six locations.
7.
Remove left section of element (7).
8.
Cap ends of element (7). Remove six bushings
(3) from element.
12-34