TM 55-1520-240-23-10
12-5
REMOVE WINDSHIELD ANTI-ICING RELAYS
(Continued)
12-5
NOTE
Pilot and copilot anti-icing relays and
center windshield anti-icing relay are
removed differently. If removing pilot
or copilot relay, perform steps 1 thru
3. If removing center windshield relay,
perform steps 4 thru 6.
PILOT AND COPILOT ANTI-ICING RELAYS
NOTE
Pilot and copilot anti-icing relays are
in nose enclosure, behind dynamic
absorber. Removal procedure is
same for both. Pilot anti-icing relay is
shown here.
1.
Tag and disconnect four wires (1) from relay (2)
by removing four screws (3), lockwashers (4),
and flat washers (5).
2.
Remove four mounting screws (6) and washers
(7).
3.
Remove relay (2).
12-15