TM 55-1520-240-23-10
13-13
DISASSEMBLE HEATER FAN (500702-5310) (AVIM)
13-13
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electrical Repairer’s Tool Kit, NSN 5180-00-323-4915
Technical Inspection Tool Kit, NSN 5180-00-323-5114
Wood Dowel, 3/8 Inch X 8 Inch
Socket Wrench Handle
Retaining Ring Pliers
Telescoping Gage
Socket, 3/4 Inch
Soldering Iron
Arbor Press
Vise
Materials:
Gloves (E184.1)
Paper Tags (E264)
Emery Cloth (E123)
Poly Paint (E285.2)
Epoxy Primer (E292.1)
Personnel Required:
Aircraft Electrician
Machinist
Inspector
References:
Task 2-350.1
TM 55-1500-322-24
Equipment Condition:
Off Helicopter Task
General Safety Instructions:
Epoxy primer (E292.1) and poly
paint (E285.2) are flammable and
toxic. They can irritate skin and
cause burns. Use only with adequate
ventilation, away from heat, sparks,
and open flame. Avoid contact with
skin, eyes, or clothing. In case of
contact, immediately flush skin or eyes
with water for at least 15 minutes.
Get medical attention for eyes.
13-59
