TM 55-1520-240-23-10
12-45
INSTALL WINDSHIELD WIPER MOTOR
(Continued)
12-45
8.
Remove caps and connect two shafts (7) to
motor (1). Do not tighten nuts (8) at this time.
9.
Lockwire plug (6). Use lockwire (E229).
10.
Position bracket (9) and two spacers (10)
between motor (1) and mount (2).
11.
Install four bolts (4) and washers (5).
12.
Tighten two nuts (8).
13.
Lockwire nuts (8) to each other across motor (1).
Use lockwire (E233).
14.
Lockwire four mounting bolts (4) together. Use
lockwire (E233).
INSPECT
FOLLOW-ON MAINTENANCE:
Secure overhead panel (Task 9-98).
Check wiper operation (TM 55-1520-240T).
END OF TASK
12-104