TM 55-1520-240-23-1
1-107
SERVICE HELICOPTER AFTER INTERMEDIATE STORAGE
1-107
INITIAL SETUP
Applicable Configurations:
All
Tools:
Tube, Annealed Copper, 1/4 Inch Diameter
Siphon Pump
Container, 5 Gallons
Protective Clothing
Respirator
Facepiece
Source of Compressed Air
Materials:
Dry Cleaning Solvent (E161)
Cloth (E120)
Hydraulic Fluid (E197)
Lockwire (E231)
Grease (E190)
Fuel (E182)
Boric Acid Solution (E83)
Gloves (E186)
Personnel Required:
Medium Helicopter Repairer (2)
Inspector
Reference:
TM 11-6140-203-15-2
DA PAM 738-751
Task 1-39
Task 1-51
Task 1-59
Task 1-60
Tasks 1-62 thru 1-73
Task 1-76
Task 1-81
Task 1-88
Task 1-103
Task 3-7
Task 3-12
Task 7-7
Task 9-27
Task 10-8
Task 10-36
Task 12-36
Task 12-41
Task 17-7
Task 17-8
Equipment Condition:
Helicopter Lubricated — 100 Hour Requirement
(Task 1-87)
Tiedown Lines Removed. Location per Task 1-26
Protective Covers Removed. Location per Task 1-32
General Safety Instructions:
Dry cleaning solvent (E161) is
combustible and toxic. It can irritate
skin and cause burns. Use only with
adequate ventilation away from open
flame. In case of contact, immediately
flush skin or eyes with water for
at least 15 minutes. Get medical
attention for eyes.
Hydraulic fluid (E197) is toxic. It can
irritate skin and cause burns. Avoid
inhaling. Use only with adequate
ventilation. Avoid contact with skin,
eyes, or clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
1-386
