TM 55-1520-240-23-1
1-24
JACK AFT END OF HELICOPTER
(Continued)
1-24
3.
Release static lock (4) from stowed position on
side being jacked. Secure to lug (5) with pin (6).
If needed, raise jack until lock can be secured.
4.
Jack as high as needed. If jacking both sides,
raise both jacks evenly, a little at a time.
LOWER HELICOPTER
5.
Lower jack (2) smoothly and slowly until wheel
touches ground. If both sides are jacked, lower
both sides evenly, a little at a time.
6.
Install chocks (1), if removed.
Landing gear can be damaged if static
lock is not released and stowed before
lowering helicopter.
7.
Release static lock (4) from lug (5). Secure in
stowed position with pin (6).
8.
Lower jack (2) until clear of pad (3).
NO BREAK - WORK HARDER
FOLLOW-ON MAINTENANCE:
Close aft landing gear access panels (Task 2-2).
END OF TASK
1-83