TM 55-1520-240-23-9
11-242
REMOVE TUNNEL CONTROLS IDLER
(Continued)
11-242
NOTE
All idler attaching hardware is covered
by insulation blankets in cabin area.
3.
Have helper in cabin area pull down edge of
insulation blanket (7) at sta. 281 to expose nut
(8) (Task 2-208).
4.
Remove cotter pin (9), nut (8), and washer (10)
from bolt (11).
5.
From outside, remove bolt (11) and washer (12).
6.
Remove idler (6).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
11-942
