TM 55-1520-240-23-9
11-223
REMOVE LCT CONNECTING LINK LOWER FITTING BEARING (AVIM)
11-223
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Arbor Press
Materials:
None
Personnel Required:
Medium Helicopter Repairer
References:
TM 1-1520-253-23
TM 55-1500-322-24
Equipment Condition:
Off Helicopter Task
NOTE
Procedure is same to remove bearing
from forward LCT connecting link
(414C3056-4), or from aft LCT
connecting link (414C3056-3).
NOTE
If a crack in the connecting link is
suspected during removal, refer to TM
1-1520-253-23.
1.
Install connecting link lower fitting (1) in arbor
press (2).
2.
Press out bearing (3) using arbor press (2) (TM
55-1500-322-24).
3.
Remove link (4) from arbor press (2).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
11-872