TM 55-1520-240-23-9
11-218
REMOVE AFT LCT ACTUATOR
(Continued)
11-218
3.
Remove cotter pin (9), nut (10), washers (11),
and bolt (12) attaching actuator (13) to yoke (7).
4.
Hold link (5) and yoke (7). Remove block (8)
and gently lower yoke. Have helper support
swashplate (6).
5.
Remove cotter pin (14), nut (15), washer
(16), and bolt (17) attaching actuator (13) to
swashplate (6).
6.
Disconnect actuator connector (18) from
receptacle (19).
7.
Tag and remove actuator (13) and tag.
8.
Install bolt (4), washer (3), and nut (2) in
swashplate (6) and connecting link (5). Install
bolts (17 and 12), washers (16 and 11), and nuts
(15 and 10) in swashplate and yoke (7). Do not
tighten nuts.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
11-861