INSTALL FORWARD LCT YOKE
Do not use cadmium plated hardware
or tools while working on yoke
assembly. Titanium yoke could be
Do not use chlorinated solvent for
cleaning. Titanium yoke could be
damaged by this solution.
Bushings must be in yoke before
installing bolts; otherwise, damage to
components will result.
Positive retention bolts are installed
in flight control connections. These
bolts are self-retaining and require a
special nut and torque (Task 1-13).
If yoke (1) has no cable strap mounting plates,
attach five mounting plates (2) to top surface.
Install plates in same positions as plates on yoke
removed. Prepare surface and install plates
Remove two bolts (3), washers (4 and 5), and
nuts (6) from lugs of yoke (1).